Skip to Main Content
Skip to Main Footer

We produce surfaces that are incredibly durable and nonporous, so they’re virtually maintenance-free. For daily routine care, just follow the simple tips below to benefit from timeless performance and appearance.

Why Caesarstone
Loading

Keep your surface safe

Care & Maintenance Tips

Step-by-Step Care

  1. Firstly, wipe away any residue.

  2. Simply spray and wipe your surface clean using a Spray Cleaner (or warm soapy water) and a clean, damp cloth

  3. Once finished, buff with a clean, dry cloth.

  1. Drench the 3M™ Foam Scrub with warm water.

  2. Apply 1-2 teaspoons of Caesarstone® Cream Cleanser directly to the foaming scrub, on the scrubber side. Gently squeeze to create a thick foam lather.

  3. Gently clean in a circular motion, using a flat, open hand. Be cautious not to apply excessive pressure or rub in one spot for too long.

  4. Leave the lathered soap mix on the surface for up to two minutes.

    Cream Cleanser
  5. Remove all excess suds, rinsing the surface with warm water and a microfibre cloth or soft, clean towel.

    Cream Cleanser
  6. Rinse and repeat several times to ensure all excess suds are removed.

    Cream Cleanser

  1. Dried spills and stains should be reanimated with water for several minutes before attempting recommended cleaning methods. Apply the Caesarstone® Spray cleaner in a circular motion.

  2. Clean the surface with a damp cloth or paper towel.

  1. Place a small amount of K2r Rust and Deodorant Stain Remover or oxalic acid on a damp cloth. Do not use an abrasive scourer.

  2. Wipe away very gently, in a circular motion.

  3. Rinse thoroughly with warm water, and dry with a soft cloth or paper towel.

  4. Follow these instructions carefully to avoid damaging the surface.

Honed, Natural, Concrete and Rough surfaces may require additional daily and weekly care. Due to the nature of the surface design, we recommended that everyday household spills like liquid droplets and rings are cleaned and dried immediately. As with any matte product, owners of Concrete and Rough Concrete finishes may see increased smudges from everyday living. To fully appreciate the texture and appearance of each surface finish, we highly recommend taking the time to view full surface designs at our Caesarstone showroom.

Top Care and Maintenance FAQ

Always refrain from placing excessive weight on your Caesarstone® benchtop. Excessive weight can also have an impact on the underlying cabinet structure.

Caesarstone Mineral™ is heat resistant, however like all stone materials, Caesarstone® can be damaged by sudden and rapid surface temperature changes. A good rule of thumb is that if your hand cannot tolerate the level of heat for more than a few seconds then the heat source is too high.

Do not put hot cookware directly on the Caesarstone Mineral™ surface.

Therefore, we always recommend placing hot pots, oven trays and fry pans directly from the oven or hot plate onto a wooden chopping board or heat trivet. We also recommend that electric fry pans, slow cookers and air fryers are also used on a wooden chopping board.

No. Caesarstone® mineral surfaces are virtually non-porous, and you will never have to use a sealer or any other kind of wax.

Caesarstone® is resistant to all kinds of cracks, chips, scratches, and stains. However, like most materials, excessive force, high point loads, pressure or heat may cause damage to the surface. Like all surface materials, Caesarstone® should be treated with care.

Caesarstone® mineral surfaces are highly durable, we recommend using a cutting board to prevent damage to the surface or knives.

You can be confident in your choice, backed by our 25-Year warranty​

Our Warranty